Home > thread milling machine 
thread milling machine
Release time: 2021-01-06 10:58:04 Number of read: 24225 second

 

Type

Max. dia. And Max. length to be machined

rotational speed of milling head

range of lead (pitch) to be machined

overall dimensions(L×W×H)and Net weight

workpiece to be machined

main usage

SB6110A/PC Semi-automatic screw rod
milling machine

M120×50(internal threads)
M100×80(external threads)

75-600rpm(10 grade)

0.75-6mm

2910×1163×1290mm

5500kg

thread

It's a special machine for milling short interal or external threads by means of comb

cutters.

SB6120A/PC Semi-automatic screw rod
milling machine

M200×50(internal threads)
M150×50(external threads)

210-2320rpm

0-3mm

2397×1123×1260mm

5000kg

thread

It's a special machine for milling short interal or external threads by means of comb

 cutters.

SZ6212A/1 Automatic thread milling machine

M160×700

 

 

 

 

It is specially used for cutting internal threads on nose cone of shells.

SK6130 NC thread milling machine

300mm×4500mm(600025001000)

60-320rpm(stepless)

1-1000mm

7990×1930×2165mm

16000kg

thread

screw rod

worm

It can cut all kinds of threads.such as :lead screws,sinple or multi-start worms and industrial pump rotors with a flaky milling cutter or a profile cutter.It also can make threads on spindle nose with a comb milling cutter.The cutting length is decided by customers

S6125 Thread milling machines

φ250×1350mm

40-250rpm(9 grade)

1-500mm

3185×1394×1230mm

7000kg

thread

screw rod

worm

It can cut threads with common or coarse pitch,such as :driving lead screws and sinple or multi-start screws by using a flaky milling cutter.It can also hob straight-toothed spline shaft gears by hobs or spindle nose by comb milling cutters.

SK6220 NC thread milling machine

M200×50(internal threads)
M150×80(external threads)

150-2400rpm(stepless)

0-6mm

3350×1835×2100mm

7000kg

thread

 

It's a special machine for making short internal(or external threads with comb milling cutters. .

SK6330 NC screw rod milling machine

φ300×4500(600025001000)

150-1300rpm(stepless)

1-1000mm

7990×1930×2165mm

16000kg

special screw rod

It can cut different threads with changeable lead or bottom diameter,constand lead

or bottom diameter ,single or multi start,multi-section with different pitches,and

different screw rod of taper thtreads.

 

 


The next two:
  • general spline shaft milling machine
  • QH2-039A NC crankshaft turning

  • Copyright@2020 All Rights Reserved QingHai No.2 Machine Tool Manufacture Co.,Ltd.